-
Equipped
with 8 Dual Core Encoders, all 16 cameras can be
-
recorded
at 30 ips (NTSC) / 25 ips (PAL) per channel.
-
MPEG-4:
High quality and high compression technology for economical
recording.
-
Supports
multiplexed video and control data over the coax (4ch
default, additional
-
4ch by
optional board WV-PB4164) and RS-485 camera control (channel
1 ~ 16).
-
Panasonic
camera control: Pan/Tilt, Zoom, Focus, Iris, Preset
Position, Auto mode (depends
-
on the
camera model) with a system controller, the monitoring
software or the web browser*.
-
Various
recording modes: Manual, Timer, Event (Pre/Post)
-
Flexible
recording/playback controls: REC, PLAY, Pause, Stop, FF, REW,
Prev Record, Next Record
-
Various
display modes: 4 / 6 / 9 / 16 split screen display (Live)
-
Sixteen
alarm inputs and four alarm outputs.
-
Synchronized audio recording for 16 channels.
-
Direct
Search and List Search (Time & Date, Event Type, Camera
number).
-
Alarm
notification via e-mail.
-
Three user
levels: Manager, Operator and Viewer
-
Camera
partitioning setting can be applied to each user level.
-
Built-in
Video Motion Detector: Mask area: 24 x 20, Sensitivity: 01 ~
99
-
Recorded
image data can be copied to CD-R, DVD-R, DVD+R, USB memory
(FAT32),
-
USB HDD
(FAT32) via COPY interface (Specified model only) or DVD-R,
CD-R via
-
internal
DVD drive (WJ-RT416V), Viewer software can be included when
copying.
-
A maximum
of 3 TB (6x 500 GB, WJ-RT416) or 2.5 TB (5x 500 GB,
-
WJ-RT416V)
hard disk drives can be installed.
-
HDD Safety
Mode to protect HDDs during installation.
-
Optional
WV-CU650 or WV-CU950 system controllers can be connected
(RS-485). Playback
-
speed can
be controlled by Jog/Shuttle. Direct camera preset position
program is also available.
-
Integration capability with System150*2 or System650*3:
System controllers connected
-
to
System150/650 can control WJ-RT416. Cameras connected to
System150/650 can
-
be
controlled from the monitoring software (RT4client) or the
web browser*.
-
Built-in
network interfaces (10Base-T / 100Base-TX) for remote
monitoring and operation.
-
Multi-recorder, Multi-site system can be made with the
provided
-
monitoring
software (RT4client).
-
Recorded
video and audio data can be downloaded to the client PC
-
with the
monitoring software or the web browser*.
-
Up to 16
network clients can monitor live spot images (total network
video stream is 16,
-
Refresh
rate depends on the number of streams, recording mode and
playback mode).
-
Up to four
playback streams can be sent to the network.
-
Selectable
Unicast/Multicast for efficient network utilization.
-
The viewer
software can convert recorded audio and video data into
-
Windows
Media-format, and also can extract audio to wav file.
